An Overview of the Process of Assessment Validation and How to Validate Assessments
An Overview of the Process of Assessment Validation and How to Validate Assessments
Blog Article
Among the numerous obligations RTOs face post-registration—annual declarations, AVETMISS reporting, marketing compliance—validation is often the most dreaded.
While we've discussed validation in multiple articles, let's return to the basics. ASQA defines validation as a quality check of the assessment process.
In other words, validation identifies which elements of an RTO's assessment process are done right and which need improvement. A proper understanding of its key components makes the task less daunting.
As per Clause 1.8 of the SRTOs 2015, RTOs are required to ensure that their assessment systems, including RPL, meet training package requirements and are conducted following the Principles of Assessment and Rules of Evidence.
According to the standards, two types of validation are necessary.
The initial assessment validation ensures your RTO's assessments comply with the training package requirements.
The next validation type confirms assessments are conducted following the principles of assessment and rules of evidence.
Therefore, validation is conducted both before and after the assessment. This article emphasizes the first type: assessment tool validation.
The Fundamentals of the Two Types of Assessment Validation
Clarifying Assessment Validation
As mentioned earlier and in our earlier blog entries, validation is divided into two parts: (1) assessment tool validation and (2) post-assessment validation.
Assessment tool validation, also called pre-assessment validation, pertains to ensuring all unit requirements are addressed, as outlined in the first part of the clause, ensuring total workbook compliance.
Post-assessment validation, in contrast, is about ensuring the implementation side, where Registered Training Organisations conduct assessments according to the Principles of Assessment and Rules of Evidence.
This discussion will center around assessment tool validation.
Methods for Conducting Assessment Tool Validation
Having discussed the two types of validation, let’s delve into assessment tool validation.
When is Assessment Tool Validation Conducted?
The objective of assessment tool validation is to ensure that all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.
This means that whenever new learning resources are acquired, you must perform assessment tool validation before student use.
You don’t need to wait until the next scheduled validation in your 5-year cycle. Immediately validate new resources to ensure they’re ready for student use.
However, this isn't the only time to perform this type of validation. Conduct assessment tool validation also when you:
- resources are updated by you
- you add new training products on scope
- training product updates are reviewed against your course
- your risk assessment includes identifying your learning resources as a risk
ASQA applies a risk-based approach to regulate RTOs, expecting regular risk assessments. Hence, student complaints about learning resources are a good opportunity for assessment tool validation.
What Training Products Need Validation?
Remember, this validation aims to ensure all learning resources are compliant before use. All RTOs are expected to validate all unit resources.
What Do You Need for Assessment Tool Validation?
Course Materials
For validating your assessment tools, you will need the full array of your learning resources:
Mapping tool – this is the initial document to review. It identifies which assessment items address unit requirements, speeding up validation.
Learner/student workbook – during validation, check if it's suitable as an assessment tool. Ensure instructions are clear and answer fields are sufficient. This is a common gap.
Assessor guide/marking guide – also verify if instructions for assessors are sufficient and if clear benchmarks for each assessment item are provided. Clear benchmarks are crucial for reliable assessment outcomes.
Other related resources – may consist of checklists, registers, and templates developed independently from the workbook and marking guide. Validate them to confirm they suit the assessment task and address unit requirements.
Validation Group
Clause 1.11 specifies the requirements for validation panel members. It states validation can be performed by one or more people. However, RTOs usually require all trainers and assessors to participate, sometimes including industry experts.
As a group, your validation panel must possess:
Vocational competencies and current industry skills applicable to the unit being validated
Recent expertise and skills in vocational teaching and learning
Any of the following training and assessment credentials:
TAE40116 Certificate IV in Training and Assessment or the next version
Validation tool/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Having a validation tool supports the validation process and documentation. It simplifies understanding how each assessment item maps to each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Simultaneously, it can serve as proof that you have validated your resources before they are used by students.
Although ASQA does not recommend or require a specific template for assessment tool validation, numerous templates can be found online. These tools typically have validators examine the tools holistically to determine if they meet the principles of assessment.
Principles of Assessment Guide Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
Although such templates ease validation, they can cause judgment errors since there’s minimal space for comments on each assessment item.
A more detailed template is recommended to thoroughly inspect each unit requirement and the assessment items that align with them. Below is an example:
Element Performance Criteria Instructions for Assessment Benchmarks Assessment Tools Rectification Recommendations
What do you Need to Check?
What Needs Review?
As we explained in our blog post Common Problems In Assessment Tools, it’s vital that your assessment tools enable trainers to follow assessment principles and evidence rules.
Fundamental Principles of Assessment
Fairness – Are equal opportunities and access offered to everyone in the assessment process?
Flexibility – Does the assessment provide multiple options to show competence according to various needs and preferences?
Validity – Does the assessment assess what it is intended to assess? Is it a valid tool for measuring the required skill or knowledge?
Reliability – Will the assessment yield the same results each time, no matter who conducts the training? Will different assessors make consistent decisions on skill competence?
Evidence Basic Rules
Validity – Does the evidence indicate that the candidate possesses the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence adequate to ensure the learner has the required skills and knowledge?
Authenticity – Does the assessment tool confirm that the work is the candidate’s own?
Currency – Are the assessment tools based on current units of competency and up-to-date industry practices?
Even though these are frequently addressed in VET professional development and nationally recognised training, a lot of tools still fail to meet these requirements.
To avoid employing learning resources that fail to meet all unit requirements, be sure to follow these guidelines:
Be Consistent with Your Teachings
Pay close attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement asks students to:
Perform each of the following at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication in accordance with service and regulatory requirements:
diaper change
prepare bottle, bottle feed babies and clean equipment
solid foods preparation and feeding babies
respond suitably to infant signs and cues
prepare infants for sleep and settle them
monitor and encourage age-appropriate physical exploration and gross motor skills
Getting students to describe the nappy-changing process for babies under 12 months old doesn’t directly meet the unit requirement. Unless the requirement assesses underpinning knowledge (i.e., knowledge evidence), students should be doing the tasks.
Pay Attention to Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed more info twice on just 1 baby won’t cut it.
Pay attention to the numbers. In our CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby isn’t sufficient.
All or No Competence
Pay attention to lists. Again, as illustrated above, if students perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Be Clearer
Each assessment item needs clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Therefore, it’s important that your instructions are not confusing for students or assessors. For instance:
What kind of information can be included in a work package?
What kind of information can be included in a work package?
The answer could include:
Necessary resources
Relevant costs
Duration of activities
Assigned functions and responsibilities
If an assessment item requires multiple answers, specify how many answers are needed from a student. This ensures your assessment is reliable, and the evidence obtained is valid.
This is also true for assessment items with double-barrelled questions or questions that require more than one answer at once. Such questions can confuse both students and assessors, as illustrated in the example below:
Name a hazard and/or environmental issue in the work area and pick the most effective hazard control hierarchy.
Possible answers may include, but are not limited to:
Weather conditions – isolating the work area, engineering controls, PPE
Work area and ground conditions – eliminating hazards, isolating, engineering
People – isolation, use of engineering controls, administration
Structural hazards – substituting, isolation, engineering
Chemical hazards – isolation, engineering, administration
Equipment or machinery – isolation, engineering controls, administration
Avoiding double-barrelled questions makes it simpler for students to answer and for assessors to accurately judge student competence.
Considering these requirements, you might wonder, “Don’t learning resource developers offer audit guarantees?” However, with these guarantees, you must wait for an audit before they help rectify noncompliance. This affects your compliance history, so it's better to take a safe and compliant approach.